Proper nozzle positioning
In pools with skimmer filtration system nozzles are usually placed opposite the skimmer at the upper part of the pool. In terms of water hydraulics, this location is not optimal, since ideal mixing of chemicals with the entire volume of water cannot take place. Especially in the summer months, during high pool usage, the formation of algae in some areas the pool may occur, even while maintaining the correct dosage of chemicals.
Rotate the nozzle to the bottom of the pool at about 45 °. Impurities on the surface of the will take a little longer to get to the Skimmer, but the overall cleanness of the pool will improve.
Do not need a sophisticated and exaggerated solution? Would you simply like to have a good and durable swimming pool, which will last? Then select plastic as your material of choice, choose your ideal shape - and leave the rest to us. We deliver the plastic swimming pool to you whole, the installation takes only a short time and you can enjoy it for years. The easiest way to own a swimming pool is right in front of you!
Plastic pools are manufactured of welded polypropylene plates with a thickness of 5 to 8 mm depending on the size of the pool. The bottom is polyfusion welded. The shell of the pool is welded the same way and it affixed to the bottom using an extruder. The pool is reinforced.around the entire perimeter.
PLASTIC POOLS Plastic swimming pools are often regarded as a poor substitute of laminated pools and foil pools possibly concrete pools. Using the right technology and working procedures, however, the can easily equal other pool types. Look for firms with quality background; you will save yourself a great deal of headache and in most cases also money.
With a pipe – the edge of the pool is finished with a 32 mm diameter polypropylene tube, which is set just above the pavement. It is an economically and constructionally undemanding option.
With a sitting edge the edge of the pool is finished with a 15 x 15 cm rim, which offsets the pool above ground. Effective solution in terms of debris not being washed into the pool, simple construction, however, with poor maintenance the rim can be easily scratched.
Tiled edge the edge of the pool is topped with 30 cm wide coping tiles, which is set slightly above the rest of the pavement surrounding the pool. This option is more construction demanding, but the swimming pool makes a better overall impression
Around the edge of the pool is installed grill covered trough. Water is first carried through gravity pipeline into the retention tank and then from here the classical filtration takes place as with skimmer pools. Pools with overflow have a more representative look, better water circulation and dirt does not stick to the walls. They construction is more demanding, especially the foundation slab. Construction of the pool also requires very carefully designed filtration system, .retention tanks, and especially gravity pipeline.
Plastic swimming pools are often regarded as a poor substitute of laminated pools and foil pools possibly concrete pools. Using the right technology and working procedures, however, the can easily equal other pool types. Look for firms with quality background; you will save yourself a great deal of headache and in most cases also money.
The bottom and the shell of a plastic swimming pool should be polyfusion welded. This method eliminates the human factor (a welder) and thus ensures a perfectly flat and solid weld.
Claims stating that a plastic swimming pool lasts 50 years are not true. Construction material (polypropylene) used by all producers is the same, the actual pool lifetime can therefore be objectively estimated at about 20 years, depending on wall thickness, chemicals used during operation and whether the swimming pool is covered (enclosures eliminate UV radiation)..
Make sure that the wall behind the stairs is cut-off. Avoid a pool, which has “water circulation holes” holes in stairs. In fact, the water will never circulate underneath, and will become a constant cause of algae and bacterial contamination.
Stairs in a pool are difficult to build from both the technical and the aesthetic point of view, therefore, we recommended you assess the quality of design directly at the manufacturer.
Plastic pools can be made up to 10 x 4 m and always are transported to the construction site whole. When building the pool on-site the quality always decreases and prices increases as a result of increased construction time.
All fields have to be filled.
Dear customers, we are pleased to announce that in 2004 were successful in obtaining the TUV certification.
Useful information for those interested in Popp pool.
Popp Company Ltd. was established in 1996 and thanks to young and dynamic team, it soon began to successfully grow and acquired an important foothold on the Czech market.
We are located only 3 km from the Brno - Bratislava Highway (41st km exit).
POPP s. r. o.
Czech Republic
info@bazenypopp.cz
Tel. +420 519 346 430
