Line Cleaning
Swimming pools with a skimmer develop over time unsightly „line" consisting of dirt, sunscreen, etc. It can be cleaned using various special products.
Use baby soap and hot water. This solution is cheap, efficient and hygienically safe. If anything remains in the pool, it will easily be captured by the filtration system.
Q: We are considering the purchase of the pool. These can be made of various materials, and somehow we cannot decide. Which material is the best in your opinion?
A: It cannot be decided, that one material is the best and another worst. When choosing a pool, it is necessary to consider the size, location, purpose of purchase, price, etc.More information can be found in the "POOLS" section.
A: According to the Building Act built-up area below 16m² requires ”Small building notification”, buildings over 16m² require building permit. If you order a pool from us, we will send you all the necessary documents for processing.
A: Of course, we can. However, it has a few drawbacks:
A: It is necessary to distinguish between a high surface water (melting snow, rain), which is not as destructive, and underground water (usually a permanent underground spring), which can cause significant problems. This topic is too extensive to discuss here. When choosing a swimming pool we will suggest a solution.
A: It should not. The ambient temperature while pouring concrete around a plastic pool should not be lower than 10 ° C. Otherwise, the concrete may shrink and subsequently, in summer, expand and cause pool bottom or wall deformation (bulging). With foil pools this cannot occur.
A: Chlorine and other oxidizers, due to the effects of UV radiation, are subject to a faster decomposition and thus lower efficiency. Automatic dosing handles this problem on its own. Ehen dosing manually, it is better to measure repeatedly. Agents should be dosed overnight or at least in the morning and evening. This problem does not need to be addressed with enclosed or otherwise covered pool.
A: The stated price really is final. Materials are included in the price of the assembly.
A: Certainly. We realize about 30% of orders this way. Once we agree on the final appearance of the pool, we will send you a contract and an advance invoice. After receiving a payment we will send you the blueprints and other documentation. In specified time we deliver and install the pool and the balance is paid.
Definitely concrete. Sand or soil are not stable during stronger precipitation and may move, which in extreme cases may result in a collapse of the pool wall.
Polypropylene plates (material from which plastic pools are manufactured) are made by Röchling Planá nad Lužnicí and IMG Bohemia (formerly Ploma Hodonín) companies. Both confirm lifetime of about 20 years. Of course, it depends on more factors (the use of proper pool chemicals, pool covering, etc.) Since the greatest enemy of all materials is UV radiation, it is advisable to have the pool covered off-season.
A: Skimmer is a surface water collector. More in the POOLS section.
A: Yes. The enclosure has anchors, which secure the enclosure to rails. For these (windy) areas, we particularly recommend our "CLASSIC” enclosure because it has the highest static strength against both the wind and snow.
A: Yes. To avoid any difficulties in installation, it is better to send us a photo of your filtration equipment shaft.
A: No exact answer can be given because the cost of the operation is affected by many factors, e.g. pool size, location, number of bathing persons, whether covered or not, the type of chemicals etc. As long as you adhere to certain principles of water filtering and pool cleaning, the cost of the operation is manageable for everyone.
Performance indicates the actual filtration performance (not the pump’s), at the specified rate of flow. Some manufacturers state performance significantly higher, but at the cost of incorrect rate of flow. The practical consequence is that the water has a high filtration pressure, and smaller impurities are pushed through the sand back into the pool. The specified rate of flow in family swimming pools is 50m³/hod/m².
All fields have to be filled.
Dear customers, we are pleased to announce that in 2004 were successful in obtaining the TUV certification.
Useful information for those interested in Popp pool.
Popp Company Ltd. was established in 1996 and thanks to young and dynamic team, it soon began to successfully grow and acquired an important foothold on the Czech market.
We are located only 3 km from the Brno - Bratislava Highway (41st km exit).
POPP s. r. o.
Czech Republic
info@bazenypopp.cz
Tel. +420 519 346 430