Proper nozzle positioning
In pools with skimmer filtration system nozzles are usually placed opposite the skimmer at the upper part of the pool. In terms of water hydraulics, this location is not optimal, since ideal mixing of chemicals with the entire volume of water cannot take place. Especially in the summer months, during high pool usage, the formation of algae in some areas the pool may occur, even while maintaining the correct dosage of chemicals.
Rotate the nozzle to the bottom of the pool at about 45 °. Impurities on the surface of the will take a little longer to get to the Skimmer, but the overall cleanness of the pool will improve.
Quality and good looks - what more could you want from a pool. Perhaps only make a unique impression and reflect your personal taste. With Popp, of course, this is not a problem. If choose foil as your material, the final design can be in many ways adapted to your vision. Do not be afraid to consult your ideas with us, in case of a foil pool you are not limited by shape, size or color.
The supporting element of foil pool is reinforced concrete slab and a perimeter wall built from concrete blocks or 120 x 25 x 25 cm Thermomur fittings, reinforced with structural steel and filled with concrete. The surface is lined with synthetic non-woven fabric. Then anchoring elements are set into the concrete shell, to which softened PVC foil (DLW or ALKORPLAN) is welded. The polyester fabric reinforced foil has a thickness of 1.5 mm, is UV radiation stabilized and colorfast.
The advantages of foil are that it can be easily welded, has high strength and resistance to UV radiation and chemical water treatment. In addition, its surface is antibacterial, so the occurrence of bacteria and fungi is limited.
To increase pool safety in areas more prone to slipping (stairs, steps, children's pools) foil with structured surface can be used. If getting ready to reconstruct an older concrete pools, it is necessary to paint the walls with antibacterial paint to prevent staining of foil, which can, using foil in these old structures sometimes occur.
All fields have to be filled.
Dear customers, we are pleased to announce that in 2004 were successful in obtaining the TUV certification.
Useful information for those interested in Popp pool.
Popp Company Ltd. was established in 1996 and thanks to young and dynamic team, it soon began to successfully grow and acquired an important foothold on the Czech market.
We are located only 3 km from the Brno - Bratislava Highway (41st km exit).
POPP s. r. o.
Czech Republic
info@bazenypopp.cz
Tel. +420 519 346 430
