Proper nozzle positioning
In pools with skimmer filtration system nozzles are usually placed opposite the skimmer at the upper part of the pool. In terms of water hydraulics, this location is not optimal, since ideal mixing of chemicals with the entire volume of water cannot take place. Especially in the summer months, during high pool usage, the formation of algae in some areas the pool may occur, even while maintaining the correct dosage of chemicals.
Rotate the nozzle to the bottom of the pool at about 45 °. Impurities on the surface of the will take a little longer to get to the Skimmer, but the overall cleanness of the pool will improve.
Although the enclosure can be moved away from the pool, it is convenient to install a door in it. It serves for entry under the enclosure particularly in colder or windy weather, when you do not want to move the entire enclosure. We offer several types of doors. Type and placement depends on the type of construction, shape of the pool, high of pool edge, etc.
Doors can be left or right hinged, mounted at the front of the highest or the lowest segment of your choice. Doors are usually placed in the center of a segment, off center placement is possible. Door height is specified by the manufacturer and is approximately 250 mm less than the height of the arc in which the door is located. The standard width of the door is 800 mm.
Bottom of enclosure frame is cut out at the point of door placement. This door type is convenient where the pool ladder would be in the way of the moving enclosure. This solution is not suitable for enclosures wider than 4.6 m due to wall strength reduction.
Doors have the frame set in front of the door opening. The doors can be placed in the largest or the smallest segment. Doors are placed left or right of the enclosure axis and travel across the entire width of the enclosure wall. Door height is limited by the design of individual enclosure models. The width of the door is 800 mm.
Doors have the frame set in front of the door opening. They can be placed only in the largest segment. The width of the door equals ½ of the width of the segment. Height of the door is 1500 - 2000 mm, according to the construction limitations of the segment.
Applicable where the side doors must be placed in other than the largest segment. Due to construction limitations they must be made from 8mm PC panes, acrylic cannot be used This type of door is recommended only if there is no other option of door placement.
Front or rear face is horizontally cut and attached by hinges. This type is used when the edge of the pool is raised above the surrounding terrain more than 80 mm and the height difference cannot be compensated by sealing brushes. It is also suitable when you have a ladder , spout, etc. in the pool and a hinged door without threshold cannot be used and also if the segments stay above the pool area even after the enclosure is moved so it is easier to swim under it. Door height can be 300-600mm.
| door type, enclosure | hinged | hinged without threshold | sliding front | sliding side | vertical sliding door | horizontally folding door |
| Perfect | yes | yes | not suitable | practical | not possible | yes |
| Elegant | yes | yes | not suitable | practical | not possible | yes |
| Classic | yes | yes | not suitable | practical | yes | yes |
| Academy | yes | yes | yes | yes | not possible | yes |
| Comfort | yes | yes | yes | yes | not possible | yes |
| Exclusive | yes | yes | yes | yes | not possible | yes |
All fields have to be filled.
Dear customers, we are pleased to announce that in 2004 were successful in obtaining the TUV certification.
Useful information for those interested in Popp pool.
Popp Company Ltd. was established in 1996 and thanks to young and dynamic team, it soon began to successfully grow and acquired an important foothold on the Czech market.
We are located only 3 km from the Brno - Bratislava Highway (41st km exit).
POPP s. r. o.
Czech Republic
info@bazenypopp.cz
Tel. +420 519 346 430